RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E22KKC-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734903745	16 Pkt	0 Pkt	0 Pkt	-45 dBm	0.02 V
1734901920	11 Pkt	0 Pkt	0 Pkt	-47 dBm	0.04 V
1734900095	12 Pkt	0 Pkt	0 Pkt	-47 dBm	0.02 V
1734896444	12 Pkt	0 Pkt	0 Pkt	-47 dBm	0.04 V
1734894618	14 Pkt	1 Pkt	1 Pkt	-48 dBm	0.02 V
1734892793	10 Pkt	0 Pkt	1 Pkt	-46 dBm	0.02 V
1734890967	15 Pkt	0 Pkt	0 Pkt	-47 dBm	0.02 V
1734889142	13 Pkt	0 Pkt	0 Pkt	-47 dBm	0.02 V
1734887317	11 Pkt	0 Pkt	0 Pkt	-46 dBm	0.02 V
1734885491	20 Pkt	0 Pkt	0 Pkt	-47 dBm	0.02 V
1734883665	1 Pkt	0 Pkt	0 Pkt	-48 dBm	0.02 V
1734882204	30 Pkt	0 Pkt	0 Pkt	-46 dBm	0.02 V
1734880378	24 Pkt	0 Pkt	0 Pkt	-47 dBm	0.02 V
1734878553	41 Pkt	0 Pkt	1 Pkt	-47 dBm	0.02 V
1734876727	28 Pkt	0 Pkt	0 Pkt	-46 dBm	0.02 V
1734874901	44 Pkt	0 Pkt	0 Pkt	-46 dBm	0.02 V
1734873075	30 Pkt	0 Pkt	0 Pkt	-46 dBm	0.02 V
1734871249	30 Pkt	0 Pkt	1 Pkt	-46 dBm	0.02 V
1734869423	23 Pkt	0 Pkt	1 Pkt	-46 dBm	0.02 V
1734867598	32 Pkt	0 Pkt	0 Pkt	-46 dBm	0.02 V
1734865772	26 Pkt	0 Pkt	0 Pkt	-46 dBm	0.02 V
1734863946	20 Pkt	0 Pkt	0 Pkt	-47 dBm	0.02 V
1734862120	17 Pkt	0 Pkt	0 Pkt	-46 dBm	0.02 V
1734860294	19 Pkt	0 Pkt	0 Pkt	-47 dBm	0.02 V
1734858469	22 Pkt	0 Pkt	0 Pkt	-47 dBm	0.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)