RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

DB0LEI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0LEI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1730423508	13.8 Volt	210 Pkt	10 Pkt	89 Pcnt
1730422307	13.8 Volt	210 Pkt	10 Pkt	95 Pcnt
1730421106	13.8 Volt	190 Pkt	10 Pkt	95 Pcnt
1730419905	13.8 Volt	160 Pkt	10 Pkt	97 Pcnt
1730418704	13.8 Volt	150 Pkt	10 Pkt	96 Pcnt
1730417502	13.8 Volt	120 Pkt	10 Pkt	98 Pcnt
1730416301	13.8 Volt	140 Pkt	10 Pkt	96 Pcnt
1730415100	13.8 Volt	120 Pkt	10 Pkt	94 Pcnt
1730413899	13.8 Volt	110 Pkt	10 Pkt	94 Pcnt
1730412698	13.8 Volt	80 Pkt	10 Pkt	93 Pcnt
1730411497	13.8 Volt	60 Pkt	10 Pkt	91 Pcnt
1730410296	13.8 Volt	40 Pkt	10 Pkt	87 Pcnt
1730409094	13.8 Volt	50 Pkt	10 Pkt	87 Pcnt
1730407894	13.8 Volt	50 Pkt	10 Pkt	81 Pcnt
1730406692	13.8 Volt	50 Pkt	10 Pkt	80 Pcnt
1730405491	13.8 Volt	40 Pkt	10 Pkt	77 Pcnt
1730404290	13.8 Volt	50 Pkt	10 Pkt	81 Pcnt
1730403089	13.8 Volt	70 Pkt	20 Pkt	89 Pcnt
1730401888	13.8 Volt	80 Pkt	40 Pkt	88 Pcnt
1730400686	13.8 Volt	90 Pkt	50 Pkt	84 Pcnt
1730399486	13.8 Volt	100 Pkt	50 Pkt	79 Pcnt
1730398284	13.8 Volt	90 Pkt	40 Pkt	78 Pcnt
1730397083	13.8 Volt	90 Pkt	30 Pkt	82 Pcnt
1730395882	13.8 Volt	70 Pkt	20 Pkt	85 Pcnt
1730394681	13.8 Volt	70 Pkt	20 Pkt	88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.073, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)