RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

ED1ZBA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED1ZBA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1736489761	13.62 Volt	250 Pkt	110 Pkt	75 Pcnt
1736488864	13.54 Volt	230 Pkt	100 Pkt	71 Pcnt
1736487963	13.62 Volt	220 Pkt	110 Pkt	69 Pcnt
1736486164	13.54 Volt	210 Pkt	100 Pkt	70 Pcnt
1736486161	13.54 Volt	210 Pkt	100 Pkt	70 Pcnt
1736484366	13.62 Volt	200 Pkt	100 Pkt	72 Pcnt
1736483463	13.62 Volt	210 Pkt	100 Pkt	77 Pcnt
1736482561	13.62 Volt	200 Pkt	100 Pkt	77 Pcnt
1736480765	13.62 Volt	210 Pkt	110 Pkt	79 Pcnt
1736479862	13.62 Volt	230 Pkt	110 Pkt	78 Pcnt
1736478963	13.62 Volt	230 Pkt	110 Pkt	80 Pcnt
1736478961	13.62 Volt	230 Pkt	110 Pkt	80 Pcnt
1736476262	13.62 Volt	230 Pkt	110 Pkt	81 Pcnt
1736475361	13.62 Volt	220 Pkt	100 Pkt	80 Pcnt
1736474462	13.62 Volt	220 Pkt	100 Pkt	79 Pcnt
1736472663	13.54 Volt	220 Pkt	100 Pkt	76 Pcnt
1736471761	13.62 Volt	220 Pkt	110 Pkt	76 Pcnt
1736470862	13.62 Volt	220 Pkt	110 Pkt	78 Pcnt
1736469962	13.62 Volt	230 Pkt	110 Pkt	79 Pcnt
1736469062	13.62 Volt	220 Pkt	90 Pkt	75 Pcnt
1736468162	13.62 Volt	220 Pkt	90 Pkt	73 Pcnt
1736465462	13.62 Volt	250 Pkt	110 Pkt	78 Pcnt
1736464562	13.62 Volt	260 Pkt	120 Pkt	81 Pcnt
1736463662	13.62 Volt	260 Pkt	120 Pkt	85 Pcnt
1736462762	13.62 Volt	250 Pkt	130 Pkt	85 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)