This is the latest recevied telemetry packets stored in our database for station/object DK8AF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734980865 | 21.9 deg C | 42.6 % | 0 | 0 | 0 |
| 1734979964 | 21.9 deg C | 42.6 % | 0 | 0 | 0 |
| 1734979064 | 21.9 deg C | 43.6 % | 0 | 0 | 0 |
| 1734978165 | 21.9 deg C | 40.6 % | 0 | 0 | 0 |
| 1734977833 | 21.9 deg C | 40.6 % | 0 | 0 | 0 |
| 1734976933 | 21.9 deg C | 40.2 % | 0 | 0 | 0 |
| 1734976033 | 22 deg C | 40.2 % | 0 | 0 | 0 |
| 1734975133 | 21.9 deg C | 40.1 % | 0 | 0 | 0 |
| 1734974233 | 22 deg C | 40.1 % | 0 | 0 | 0 |
| 1734973333 | 22 deg C | 40.1 % | 0 | 0 | 0 |
| 1734972433 | 22.1 deg C | 39.9 % | 0 | 0 | 0 |
| 1734971532 | 22.1 deg C | 39.8 % | 0 | 0 | 0 |
| 1734970632 | 22.1 deg C | 39.7 % | 0 | 0 | 0 |
| 1734969732 | 22.1 deg C | 39.8 % | 0 | 0 | 0 |
| 1734968832 | 22.1 deg C | 39.8 % | 0 | 0 | 0 |
| 1734967932 | 22.2 deg C | 40 % | 0 | 0 | 0 |
| 1734967032 | 22.2 deg C | 40.1 % | 0 | 0 | 0 |
| 1734966132 | 22.3 deg C | 39.8 % | 0 | 0 | 0 |
| 1734965801 | 22.3 deg C | 39.7 % | 0 | 0 | 0 |
| 1734964901 | 22.3 deg C | 39.7 % | 0 | 0 | 0 |
| 1734964001 | 22.3 deg C | 39.5 % | 0 | 0 | 0 |
| 1734963101 | 22.3 deg C | 39.7 % | 0 | 0 | 0 |
| 1734962201 | 22.3 deg C | 39.8 % | 0 | 0 | 0 |
| 1734961300 | 22.4 deg C | 39.8 % | 0 | 0 | 0 |
| 1734960400 | 22.4 deg C | 39.8 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)