RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LU2EP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2EP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734954316	25 Pkt	14 Pkt	2 Pkt	-60 dBm	11.92 V
1734952475	24 Pkt	5 Pkt	1 Pkt	-58 dBm	11.81 V
1734950641	28 Pkt	6 Pkt	1 Pkt	-58 dBm	11.83 V
1734948804	37 Pkt	5 Pkt	3 Pkt	-45 dBm	12 V
1734946964	30 Pkt	6 Pkt	9 Pkt	-49 dBm	12.16 V
1734945127	39 Pkt	3 Pkt	7 Pkt	-49 dBm	12.43 V
1734943289	32 Pkt	1 Pkt	7 Pkt	-48 dBm	11.89 V
1734941458	21 Pkt	12 Pkt	1 Pkt	-47 dBm	12.35 V
1734941458	21 Pkt	12 Pkt	1 Pkt	-49 dBm	12.35 V
1734940327	26 Pkt	10 Pkt	2 Pkt	-47 dBm	12.2 V
1734938487	26 Pkt	13 Pkt	0 Pkt	-48 dBm	11.96 V
1734936643	30 Pkt	19 Pkt	1 Pkt	-49 dBm	12.18 V
1734929249	34 Pkt	38 Pkt	1 Pkt	-48 dBm	12.18 V
1734927382	42 Pkt	9 Pkt	1 Pkt	-49 dBm	11.96 V
1734925540	35 Pkt	19 Pkt	1 Pkt	-50 dBm	12.2 V
1734923688	34 Pkt	6 Pkt	1 Pkt	-50 dBm	12.37 V
1734921851	31 Pkt	10 Pkt	2 Pkt	-50 dBm	11.94 V
1734920009	42 Pkt	7 Pkt	2 Pkt	-51 dBm	12.1 V
1734918168	30 Pkt	8 Pkt	2 Pkt	-49 dBm	12.06 V
1734916327	23 Pkt	3 Pkt	2 Pkt	-49 dBm	12.08 V
1734914493	23 Pkt	10 Pkt	3 Pkt	-52 dBm	12.2 V
1734912655	17 Pkt	4 Pkt	1 Pkt	-52 dBm	11.73 V
1734911475	32 Pkt	14 Pkt	2 Pkt	-53 dBm	11.69 V
1734909629	30 Pkt	5 Pkt	1 Pkt	-53 dBm	12.22 V
1734907792	47 Pkt	12 Pkt	0 Pkt	-53 dBm	12.2 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)