RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

CHKWLA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CHKWLA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734953975	15.45 Volt	470 Pkt	120 Pkt	69 Pcnt
1734952175	15.45 Volt	460 Pkt	120 Pkt	68 Pcnt
1734950375	15.53 Volt	430 Pkt	110 Pkt	64 Pcnt
1734948575	15.53 Volt	440 Pkt	110 Pkt	67 Pcnt
1734946775	15.53 Volt	440 Pkt	90 Pkt	72 Pcnt
1734944976	15.45 Volt	450 Pkt	80 Pkt	73 Pcnt
1734943176	15.45 Volt	450 Pkt	90 Pkt	67 Pcnt
1734941376	15.53 Volt	470 Pkt	120 Pkt	68 Pcnt
1734939576	15.6 Volt	520 Pkt	130 Pkt	74 Pcnt
1734937776	15.6 Volt	510 Pkt	130 Pkt	73 Pcnt
1734928776	15.6 Volt	480 Pkt	100 Pkt	71 Pcnt
1734926976	15.6 Volt	400 Pkt	100 Pkt	72 Pcnt
1734925176	15.53 Volt	410 Pkt	120 Pkt	71 Pcnt
1734921576	15.38 Volt	450 Pkt	100 Pkt	71 Pcnt
1734919776	15.45 Volt	540 Pkt	110 Pkt	72 Pcnt
1734917976	15.38 Volt	570 Pkt	120 Pkt	69 Pcnt
1734916176	15.3 Volt	510 Pkt	110 Pkt	66 Pcnt
1734914376	15.38 Volt	490 Pkt	140 Pkt	64 Pcnt
1734912576	15.23 Volt	530 Pkt	160 Pkt	68 Pcnt
1734910776	15.3 Volt	510 Pkt	160 Pkt	65 Pcnt
1734908976	15.15 Volt	510 Pkt	170 Pkt	63 Pcnt
1734907176	15 Volt	500 Pkt	130 Pkt	63 Pcnt
1734905376	15 Volt	490 Pkt	120 Pkt	64 Pcnt
1734903576	15 Volt	490 Pkt	140 Pkt	64 Pcnt
1734901776	15.38 Volt	490 Pkt	160 Pkt	62 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)