This is the latest recevied telemetry packets stored in our database for station/object KL3EX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery* | DevTemp* | InTemp* | ExTemp* | Other* |
---|---|---|---|---|---|
1730415421 | 1156 V | 119 F | 92 F | 34 F | 0 |
1730414220 | 1156 V | 119 F | 92 F | 34 F | 0 |
1730411820 | 1153 V | 119 F | 91 F | 34 F | 0 |
1730410619 | 1156 V | 118 F | 91 F | 33 F | 0 |
1730409420 | 1156 V | 118 F | 92 F | 33 F | 0 |
1730408217 | 1156 V | 119 F | 91 F | 33 F | 0 |
1730407016 | 1153 V | 118 F | 91 F | 33 F | 0 |
1730405817 | 1156 V | 117 F | 91 F | 32 F | 0 |
1730404618 | 1156 V | 118 F | 91 F | 32 F | 0 |
1730403415 | 1156 V | 119 F | 91 F | 32 F | 0 |
1730402214 | 1153 V | 118 F | 91 F | 32 F | 0 |
1730401015 | 1156 V | 118 F | 92 F | 32 F | 0 |
1730399814 | 1156 V | 119 F | 92 F | 32 F | 0 |
1730398614 | 1156 V | 119 F | 92 F | 32 F | 0 |
1730397412 | 1156 V | 119 F | 92 F | 32 F | 0 |
1730396212 | 1156 V | 119 F | 92 F | 32 F | 0 |
1730395012 | 1156 V | 119 F | 92 F | 31 F | 0 |
1730393812 | 1156 V | 120 F | 92 F | 31 F | 0 |
1730392610 | 1158 V | 119 F | 92 F | 31 F | 0 |
1730391409 | 1153 V | 120 F | 92 F | 30 F | 0 |
1730390211 | 1156 V | 119 F | 92 F | 30 F | 0 |
1730389010 | 1156 V | 119 F | 93 F | 30 F | 0 |
1730387809 | 1156 V | 120 F | 93 F | 31 F | 0 |
1730386608 | 1158 V | 120 F | 93 F | 31 F | 0 |
1730385406 | 1156 V | 120 F | 94 F | 31 F | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
DevTemp: 0, 1, 0
InTemp: 0, 1, 0
ExTemp: 0, 1, 0
Other: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)