This is the latest recevied telemetry packets stored in our database for station/object IW1QAF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1731577314 | 0.01 VDC | 0 | 1 | 203 | 0 |
| 1731576845 | 0.14 VDC | 0 | 2 | 204 | 0 |
| 1731576239 | 0.16 VDC | 0 | 5 | 204 | 0 |
| 1731575633 | 0.09 VDC | 0 | 4 | 204 | 0 |
| 1731575027 | 0.22 VDC | 0 | 7 | 204 | 12 |
| 1731574421 | 0.12 VDC | 0 | 6 | 204 | 0 |
| 1731573815 | 0.18 VDC | 0 | 8 | 204 | 0 |
| 1731573209 | 0 VDC | 0 | 0 | 204 | 0 |
| 1731573085 | 0.19 VDC | 0 | 6 | 205 | 0 |
| 1731572479 | 0.16 VDC | 0 | 5 | 204 | 0 |
| 1731571873 | 0.25 VDC | 0 | 11 | 204 | 0 |
| 1731571266 | 0.29 VDC | 0 | 7 | 203 | 0 |
| 1731570660 | 0.26 VDC | 0 | 14 | 205 | 0 |
| 1731570054 | 0.22 VDC | 0 | 3 | 205 | 0 |
| 1731569448 | 0.28 VDC | 0 | 10 | 204 | 0 |
| 1731568843 | 0.22 VDC | 0 | 6 | 203 | 6 |
| 1731568237 | 0.25 VDC | 0 | 11 | 205 | 0 |
| 1731567631 | 0.31 VDC | 0 | 17 | 203 | 0 |
| 1731567025 | 0.22 VDC | 0 | 5 | 203 | 6 |
| 1731566419 | 0.22 VDC | 0 | 5 | 203 | 0 |
| 1731565814 | 0.22 VDC | 0 | 7 | 203 | 0 |
| 1731565208 | 0.18 VDC | 0 | 2 | 204 | 0 |
| 1731564602 | 0.28 VDC | 0 | 8 | 203 | 0 |
| 1731563997 | 0.27 VDC | 0 | 9 | 204 | 0 |
| 1731563391 | 0.29 VDC | 0 | 14 | 203 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)