RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YM3KC-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM3KC-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734964806	76 Pkt	6 Pkt	0 Pkt	-20 dBm	11.94 V
1734963923	68 Pkt	3 Pkt	0 Pkt	-20 dBm	11.94 V
1734963046	3 Pkt	0 Pkt	0 Pkt	-22 dBm	11.94 V
1734962151	81 Pkt	8 Pkt	0 Pkt	-21 dBm	11.94 V
1734961264	69 Pkt	4 Pkt	4 Pkt	-22 dBm	11.94 V
1734960386	12 Pkt	0 Pkt	0 Pkt	-22 dBm	11.94 V
1734959868	83 Pkt	5 Pkt	0 Pkt	-23 dBm	11.94 V
1734958985	67 Pkt	4 Pkt	0 Pkt	-23 dBm	11.94 V
1734958985	67 Pkt	4 Pkt	0 Pkt	-21 dBm	11.94 V
1734958104	72 Pkt	5 Pkt	0 Pkt	-24 dBm	11.94 V
1734957220	86 Pkt	3 Pkt	0 Pkt	-23 dBm	11.94 V
1734956338	75 Pkt	5 Pkt	0 Pkt	-23 dBm	11.94 V
1734955454	70 Pkt	3 Pkt	0 Pkt	-21 dBm	11.94 V
1734954576	71 Pkt	4 Pkt	0 Pkt	-23 dBm	11.94 V
1734953693	67 Pkt	6 Pkt	0 Pkt	-25 dBm	11.94 V
1734952811	74 Pkt	5 Pkt	0 Pkt	-22 dBm	11.94 V
1734951931	40 Pkt	5 Pkt	0 Pkt	-22 dBm	11.94 V
1734951056	47 Pkt	4 Pkt	0 Pkt	-22 dBm	11.94 V
1734950181	46 Pkt	4 Pkt	0 Pkt	-24 dBm	11.94 V
1734949307	40 Pkt	4 Pkt	0 Pkt	-22 dBm	11.94 V
1734948430	46 Pkt	3 Pkt	0 Pkt	-21 dBm	11.94 V
1734947555	42 Pkt	3 Pkt	0 Pkt	-21 dBm	11.94 V
1734946683	51 Pkt	4 Pkt	0 Pkt	-23 dBm	11.94 V
1734945808	41 Pkt	3 Pkt	0 Pkt	-21 dBm	11.94 V
1734944936	45 Pkt	5 Pkt	0 Pkt	-23 dBm	11.94 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)