This is the latest recevied telemetry packets stored in our database for station/object W6PKT-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734928311 | 11.8 | 0 | 12 | 16 | 110 |
| 1734920661 | 11.9 | 0.1 | 12 | 16 | 105 |
| 1734918112 | 11.9 | 0 | 12 | 16 | 110 |
| 1734915561 | 11.4 | 1.3 | 19 | 19 | 124 |
| 1734913010 | 11.9 | 6.2 | 42 | 29 | 128 |
| 1734910460 | 12 | 13.7 | 74 | 43 | 131 |
| 1734907912 | 12 | 13.7 | 73 | 42 | 132 |
| 1734905360 | 12.1 | 13.8 | 74 | 43 | 132 |
| 1734902810 | 12.2 | 14 | 75 | 44 | 132 |
| 1734900260 | 12.4 | 14.2 | 76 | 44 | 133 |
| 1734897711 | 12.8 | 14.8 | 77 | 44 | 133 |
| 1734895160 | 12.3 | 14.2 | 76 | 43 | 133 |
| 1734892609 | 12.1 | 13.9 | 74 | 43 | 133 |
| 1734890061 | 11.9 | 13.8 | 73 | 42 | 133 |
| 1734887509 | 11.8 | 13.6 | 72 | 41 | 133 |
| 1734884960 | 11.8 | 13.6 | 69 | 40 | 133 |
| 1734882417 | 11.8 | 11.6 | 61 | 37 | 131 |
| 1734879859 | 11.8 | 0.1 | 10 | 15 | 104 |
| 1734877309 | 11.8 | 0 | 10 | 15 | 103 |
| 1734872209 | 11.8 | 0 | 10 | 15 | 103 |
| 1734869658 | 11.8 | 0 | 10 | 15 | 103 |
| 1734867108 | 11.8 | 0 | 10 | 14 | 103 |
| 1734864558 | 11.8 | 0 | 10 | 15 | 103 |
| 1734862008 | 11.8 | 0 | 10 | 14 | 103 |
| 1734859457 | 11.3 | 0 | 10 | 15 | 103 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)