RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS6KLJ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1736522250	0 Pkt	3 Pkt	-48 dBm	0.1 V
1736520427	0 Pkt	1 Pkt	-48 dBm	0.1 V
1736518605	0 Pkt	1 Pkt	-49 dBm	0.1 V
1736516783	0 Pkt	0 Pkt	-49 dBm	0.1 V
1736514961	0 Pkt	0 Pkt	-48 dBm	0.1 V
1736513139	0 Pkt	0 Pkt	-48 dBm	0.1 V
1736511317	0 Pkt	0 Pkt	-48 dBm	0.1 V
1736509495	0 Pkt	0 Pkt	-48 dBm	0.1 V
1736507673	0 Pkt	1 Pkt	-48 dBm	0.1 V
1736505851	38 Pkt	3 Pkt	-49 dBm	0.1 V
1736504017	0 Pkt	2 Pkt	-50 dBm	0.1 V
1736502195	0 Pkt	0 Pkt	-49 dBm	0.1 V
1736500373	0 Pkt	1 Pkt	-50 dBm	0.1 V
1736498550	0 Pkt	2 Pkt	-49 dBm	0.1 V
1736496728	0 Pkt	0 Pkt	-49 dBm	0.1 V
1736494906	0 Pkt	0 Pkt	-48 dBm	0.1 V
1736493084	0 Pkt	0 Pkt	-50 dBm	0.1 V
1736491262	0 Pkt	1 Pkt	-50 dBm	0.1 V
1736489440	0 Pkt	2 Pkt	-48 dBm	0.1 V
1736487618	0 Pkt	1 Pkt	-49 dBm	0.1 V
1736485796	0 Pkt	1 Pkt	-50 dBm	0.1 V
1736483974	0 Pkt	0 Pkt	-49 dBm	0.1 V
1736482152	0 Pkt	0 Pkt	-50 dBm	0.1 V
1736480330	0 Pkt	0 Pkt	-49 dBm	0.1 V
1736478508	0 Pkt	0 Pkt	-49 dBm	0.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)