RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

K2CSN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2CSN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1736742444	29 Pkts	27 Pkts	7 Pkts	25 C
1736738844	23 Pkts	21 Pkts	9 Pkts	26 C
1736735244	22 Pkts	20 Pkts	8 Pkts	26 C
1736731644	22 Pkts	20 Pkts	7 Pkts	26 C
1736728044	26 Pkts	24 Pkts	9 Pkts	26 C
1736724444	22 Pkts	20 Pkts	6 Pkts	26 C
1736720845	33 Pkts	31 Pkts	10 Pkts	26 C
1736717245	48 Pkts	46 Pkts	20 Pkts	26 C
1736713645	57 Pkts	55 Pkts	24 Pkts	26 C
1736710045	30 Pkts	28 Pkts	6 Pkts	26 C
1736706445	22 Pkts	20 Pkts	7 Pkts	26 C
1736702845	47 Pkts	45 Pkts	23 Pkts	26 C
1736699244	60 Pkts	58 Pkts	24 Pkts	27 C
1736695644	42 Pkts	40 Pkts	15 Pkts	27 C
1736692044	34 Pkts	32 Pkts	14 Pkts	27 C
1736688444	29 Pkts	27 Pkts	13 Pkts	28 C
1736684844	30 Pkts	28 Pkts	16 Pkts	27 C
1736681245	35 Pkts	33 Pkts	16 Pkts	27 C
1736677645	37 Pkts	35 Pkts	18 Pkts	26 C
1736674044	30 Pkts	28 Pkts	15 Pkts	27 C
1736670444	32 Pkts	30 Pkts	14 Pkts	27 C
1736666844	31 Pkts	29 Pkts	15 Pkts	27 C
1736663244	34 Pkts	32 Pkts	14 Pkts	26 C
1736659644	24 Pkts	22 Pkts	10 Pkts	26 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)