RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SQ7BFT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ7BFT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1736459620	1 ug/m3	2 ug/m3	3 ug/m3	-84 dBm	0.1 V
1736458747	1 ug/m3	2 ug/m3	3 ug/m3	-84 dBm	0.08 V
1736457824	2 ug/m3	3 ug/m3	3 ug/m3	-83 dBm	0.1 V
1736456901	2 ug/m3	3 ug/m3	4 ug/m3	-83 dBm	0.1 V
1736455978	2 ug/m3	4 ug/m3	4 ug/m3	-84 dBm	0.1 V
1736455055	2 ug/m3	6 ug/m3	6 ug/m3	-85 dBm	0.1 V
1736454132	3 ug/m3	5 ug/m3	5 ug/m3	-85 dBm	0.08 V
1736451579	2 ug/m3	3 ug/m3	3 ug/m3	-80 dBm	0.08 V
1736451132	2 ug/m3	4 ug/m3	5 ug/m3	-82 dBm	0.1 V
1736449429	3 ug/m3	7 ug/m3	7 ug/m3	-79 dBm	0.08 V
1736448361	3 ug/m3	7 ug/m3	7 ug/m3	-82 dBm	0.08 V
1736446953	4 ug/m3	7 ug/m3	7 ug/m3	-79 dBm	0.1 V
1736445929	4 ug/m3	7 ug/m3	7 ug/m3	-81 dBm	0.1 V
1736445006	3 ug/m3	6 ug/m3	6 ug/m3	-81 dBm	0.08 V
1736444083	2 ug/m3	4 ug/m3	4 ug/m3	-78 dBm	0.08 V
1736443122	1 ug/m3	4 ug/m3	4 ug/m3	-79 dBm	0.08 V
1736442199	1 ug/m3	2 ug/m3	2 ug/m3	-79 dBm	0.1 V
1736441276	1 ug/m3	2 ug/m3	2 ug/m3	-81 dBm	0.08 V
1736440352	1 ug/m3	3 ug/m3	3 ug/m3	-82 dBm	0.08 V
1736440218	1 ug/m3	3 ug/m3	3 ug/m3	-82 dBm	0.1 V
1736439294	1 ug/m3	2 ug/m3	2 ug/m3	-83 dBm	0.1 V
1736438371	1 ug/m3	2 ug/m3	2 ug/m3	-82 dBm	0.08 V
1736437447	1 ug/m3	2 ug/m3	2 ug/m3	-78 dBm	0.1 V
1736436524	1 ug/m3	2 ug/m3	2 ug/m3	-79 dBm	0.14 V
1736436093	2 ug/m3	3 ug/m3	3 ug/m3	-78 dBm	0.16 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)