RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

CT4TX-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CT4TX-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TxTraffic*	RSSI*	Voltage*
1736385531	133 Pkt	-52 dBm	8.24 V
1736383700	139 Pkt	-51 dBm	8.24 V
1736381870	133 Pkt	-51 dBm	8.26 V
1736380040	133 Pkt	-51 dBm	8.22 V
1736378210	133 Pkt	-52 dBm	8.22 V
1736376380	145 Pkt	-52 dBm	8.24 V
1736374550	148 Pkt	-44 dBm	8.24 V
1736372718	148 Pkt	-52 dBm	8.22 V
1736370887	172 Pkt	-52 dBm	8.26 V
1736369052	176 Pkt	-54 dBm	8.24 V
1736367219	5 Pkt	-54 dBm	8.22 V
1736366207	194 Pkt	-52 dBm	8.26 V
1736364372	12 Pkt	-54 dBm	8.24 V
1736364140	182 Pkt	-52 dBm	8.26 V
1736362308	183 Pkt	-54 dBm	8.26 V
1736358367	4 Pkt	-71 dBm	8.24 V
1736357831	144 Pkt	-54 dBm	8.26 V
1736356000	145 Pkt	-55 dBm	8.24 V
1736354170	129 Pkt	-55 dBm	8.26 V
1736350864	4 Pkt	-53 dBm	8.26 V
1736349424	132 Pkt	-53 dBm	8.26 V
1736347592	134 Pkt	-53 dBm	8.26 V
1736345762	126 Pkt	-50 dBm	8.26 V
1736343931	142 Pkt	-53 dBm	8.22 V
1736342099	141 Pkt	-53 dBm	8.22 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)