This is the latest recevied telemetry packets stored in our database for station/object OE1KDA-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | press* | temp.in* | hum* | eGAS* | temp.out* |
---|---|---|---|---|---|
1718716422 | 993.7 hPa | 27.4 C deg | 52.6 % | 592 - | 32 C deg |
1718712305 | 994.2 hPa | 27.1 C deg | 53.1 % | 568 - | 30 C deg |
1718710602 | 994.4 hPa | 27 C deg | 53.2 % | 574 - | 29.2 C deg |
1718706789 | 994.7 hPa | 26.7 C deg | 53.8 % | 494 - | 28.2 C deg |
1718705486 | 994.8 hPa | 26.6 C deg | 53.3 % | 514 - | 27.8 C deg |
1718703682 | 995 hPa | 26.5 C deg | 53 % | 530 - | 26.8 C deg |
1718694939 | 995.1 hPa | 26.1 C deg | 54.4 % | 410 - | 24.2 C deg |
1718691224 | 995.2 hPa | 25 C deg | 57.7 % | 207 - | 23 C deg |
1718661886 | 993.5 hPa | 26.6 C deg | 52.6 % | 472 - | 22.9 C deg |
1718657172 | 993.3 hPa | 26.7 C deg | 50.7 % | 408 - | 24.4 C deg |
1718651849 | 992.5 hPa | 26.7 C deg | 50.2 % | 469 - | 25.2 C deg |
1718649442 | 992.2 hPa | 26.7 C deg | 50.4 % | 503 - | 26.4 C deg |
1718645026 | 992.2 hPa | 26.6 C deg | 50.3 % | 531 - | 27.8 C deg |
1718641007 | 992.3 hPa | 26.5 C deg | 50.3 % | 567 - | 28.2 C deg |
1718636186 | 992.4 hPa | 26.3 C deg | 50.1 % | 576 - | 29.8 C deg |
1718633075 | 992.6 hPa | 26.1 C deg | 49.2 % | 586 - | 30.2 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
eGAS: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)