RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

DL8MKG-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL8MKG-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1736552083	13.3 Volt	70 Pkt	10 Pkt	61 Pcnt	1 C
1736551482	13.3 Volt	70 Pkt	10 Pkt	61 Pcnt	1 C
1736550882	13.3 Volt	70 Pkt	10 Pkt	61 Pcnt	1 C
1736550281	13.3 Volt	50 Pkt	10 Pkt	53 Pcnt	1 C
1736549680	13.3 Volt	40 Pkt	10 Pkt	47 Pcnt	1 C
1736549080	13.3 Volt	30 Pkt	10 Pkt	33 Pcnt	1 C
1736548479	13.3 Volt	30 Pkt	0 Pkt	38 Pcnt	1 C
1736547878	13.3 Volt	30 Pkt	0 Pkt	37 Pcnt	1 C
1736547279	13.3 Volt	30 Pkt	0 Pkt	37 Pcnt	1 C
1736546678	13.3 Volt	40 Pkt	0 Pkt	43 Pcnt	1 C
1736546077	13.3 Volt	50 Pkt	10 Pkt	48 Pcnt	1 C
1736545476	13.3 Volt	60 Pkt	10 Pkt	61 Pcnt	1 C
1736544876	13.3 Volt	50 Pkt	10 Pkt	54 Pcnt	1 C
1736544275	13.3 Volt	50 Pkt	10 Pkt	56 Pcnt	1 C
1736543675	13.3 Volt	50 Pkt	10 Pkt	55 Pcnt	1 C
1736543074	13.3 Volt	50 Pkt	10 Pkt	58 Pcnt	1 C
1736542474	13.3 Volt	50 Pkt	10 Pkt	57 Pcnt	1 C
1736541873	13.3 Volt	50 Pkt	10 Pkt	60 Pcnt	1 C
1736541273	13.3 Volt	60 Pkt	10 Pkt	63 Pcnt	1 C
1736540672	13.3 Volt	60 Pkt	10 Pkt	63 Pcnt	1 C
1736540071	13.3 Volt	50 Pkt	10 Pkt	65 Pcnt	1.5 C
1736539471	13.3 Volt	50 Pkt	10 Pkt	63 Pcnt	1.5 C
1736538870	13.3 Volt	40 Pkt	10 Pkt	55 Pcnt	1.5 C
1736538270	13.3 Volt	40 Pkt	10 Pkt	43 Pcnt	1.5 C
1736537669	13.3 Volt	30 Pkt	10 Pkt	36 Pcnt	1.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, -0.2

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)