This is the latest recevied telemetry packets stored in our database for station/object IQ5VK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU Temp* | CPU Load* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734984306 | 39.7 Deg.C | 72 % | 0 | 0 | 0 |
| 1734984006 | 36.7 Deg.C | 62 % | 0 | 0 | 0 |
| 1734983706 | 38.9 Deg.C | 62 % | 0 | 0 | 0 |
| 1734983406 | 36.4 Deg.C | 62 % | 0 | 0 | 0 |
| 1734983106 | 34.6 Deg.C | 61 % | 0 | 0 | 0 |
| 1734982807 | 38.4 Deg.C | 62 % | 0 | 0 | 0 |
| 1734982506 | 37.7 Deg.C | 63 % | 0 | 0 | 0 |
| 1734982207 | 38.4 Deg.C | 62 % | 0 | 0 | 0 |
| 1734981906 | 37.2 Deg.C | 61 % | 0 | 0 | 0 |
| 1734981607 | 38.5 Deg.C | 62 % | 0 | 0 | 0 |
| 1734981306 | 37.4 Deg.C | 60 % | 0 | 0 | 0 |
| 1734981011 | 37.3 Deg.C | 62 % | 0 | 0 | 0 |
| 1734980706 | 38 Deg.C | 62 % | 0 | 0 | 0 |
| 1734980406 | 37.2 Deg.C | 57 % | 0 | 0 | 0 |
| 1734980106 | 38.1 Deg.C | 61 % | 0 | 0 | 0 |
| 1734979806 | 37.7 Deg.C | 62 % | 0 | 0 | 0 |
| 1734979507 | 36.8 Deg.C | 61 % | 0 | 0 | 0 |
| 1734979206 | 37.2 Deg.C | 63 % | 0 | 0 | 0 |
| 1734978906 | 38 Deg.C | 61 % | 0 | 0 | 0 |
| 1734978606 | 37 Deg.C | 62 % | 0 | 0 | 0 |
| 1734978306 | 36.6 Deg.C | 62 % | 0 | 0 | 0 |
| 1734978006 | 37.5 Deg.C | 62 % | 0 | 0 | 0 |
| 1734977707 | 38 Deg.C | 61 % | 0 | 0 | 0 |
| 1734977406 | 36.6 Deg.C | 62 % | 0 | 0 | 0 |
| 1734977106 | 38.3 Deg.C | 62 % | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU Temp: 0, 0.1, 0
CPU Load: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)