RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BM6HLR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM6HLR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/10m*	RxPkts/1h*	RxPkts/24h*
1734965399	43 C	14 p	82 p	2351 p
1734964199	42 C	17 p	92 p	2326 p
1734962999	42 C	13 p	111 p	2294 p
1734961799	42 C	22 p	116 p	2269 p
1734960599	41 C	16 p	112 p	2234 p
1734959399	41 C	16 p	97 p	2183 p
1734958199	41 C	17 p	96 p	2153 p
1734956999	41 C	18 p	139 p	2122 p
1734955799	41 C	14 p	180 p	2086 p
1734954599	41 C	35 p	237 p	2057 p
1734953399	41 C	30 p	215 p	1983 p
1734952199	41 C	47 p	187 p	1906 p
1734950999	42 C	29 p	211 p	1820 p
1734949799	42 C	23 p	260 p	1768 p
1734948599	41 C	56 p	290 p	1719 p
1734947399	41 C	47 p	212 p	1609 p
1734946199	42 C	40 p	156 p	1508 p
1734944999	42 C	14 p	139 p	1429 p
1734943799	42 C	18 p	162 p	1397 p
1734942599	42 C	23 p	167 p	1352 p
1734941398	42 C	38 p	169 p	1290 p
1734940198	42 C	23 p	152 p	1235 p
1734938999	42 C	34 p	157 p	1185 p
1734937799	42 C	22 p	165 p	1121 p
1734936599	43 C	22 p	163 p	1083 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/10m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)