RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA1NI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1NI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734964074	9 Pkt	0 Pkt	0 Pkt	-58 dBm	0.04 V
1734963336	118 Pkt	9 Pkt	1 Pkt	-59 dBm	0.04 V
1734962606	99 Pkt	13 Pkt	4 Pkt	-64 dBm	0.04 V
1734961876	109 Pkt	8 Pkt	7 Pkt	-60 dBm	0.04 V
1734961146	126 Pkt	11 Pkt	4 Pkt	-63 dBm	0.04 V
1734960416	131 Pkt	10 Pkt	4 Pkt	-62 dBm	0.04 V
1734959686	122 Pkt	9 Pkt	6 Pkt	-64 dBm	0.04 V
1734958956	116 Pkt	12 Pkt	9 Pkt	-61 dBm	0.04 V
1734958226	102 Pkt	9 Pkt	1 Pkt	-63 dBm	0.04 V
1734957496	118 Pkt	7 Pkt	2 Pkt	-59 dBm	0.04 V
1734956766	129 Pkt	8 Pkt	2 Pkt	-59 dBm	0.04 V
1734956036	130 Pkt	8 Pkt	2 Pkt	-57 dBm	0.04 V
1734955306	112 Pkt	12 Pkt	4 Pkt	-58 dBm	0.04 V
1734954576	108 Pkt	8 Pkt	4 Pkt	-60 dBm	0.04 V
1734953846	101 Pkt	12 Pkt	2 Pkt	-58 dBm	0.04 V
1734953116	100 Pkt	3 Pkt	5 Pkt	-62 dBm	0.04 V
1734952386	86 Pkt	11 Pkt	3 Pkt	-61 dBm	0.04 V
1734951656	82 Pkt	8 Pkt	10 Pkt	-63 dBm	0.04 V
1734950926	92 Pkt	5 Pkt	4 Pkt	-65 dBm	0.04 V
1734950196	84 Pkt	0 Pkt	9 Pkt	-63 dBm	0.02 V
1734949466	8 Pkt	0 Pkt	1 Pkt	-65 dBm	0.04 V
1734948660	83 Pkt	19 Pkt	9 Pkt	-64 dBm	0.04 V
1734947931	83 Pkt	20 Pkt	12 Pkt	-59 dBm	0.04 V
1734947200	82 Pkt	16 Pkt	3 Pkt	-63 dBm	0.04 V
1734946471	71 Pkt	16 Pkt	7 Pkt	-58 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)