RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS5SQI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5SQI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734930154	0 Pkt	5 Pkt	-72 dBm	12.74 V
1734929232	0 Pkt	0 Pkt	-76 dBm	12.65 V
1734928308	0 Pkt	0 Pkt	-71 dBm	12.63 V
1734927382	0 Pkt	0 Pkt	-72 dBm	12.63 V
1734926461	0 Pkt	0 Pkt	-74 dBm	12.61 V
1734925534	0 Pkt	0 Pkt	-72 dBm	12.65 V
1734924610	0 Pkt	1 Pkt	-70 dBm	12.63 V
1734923685	0 Pkt	1 Pkt	-71 dBm	12.71 V
1734922761	0 Pkt	0 Pkt	-72 dBm	12.65 V
1734921837	0 Pkt	1 Pkt	-71 dBm	12.76 V
1734920913	0 Pkt	2 Pkt	-74 dBm	12.8 V
1734919989	0 Pkt	0 Pkt	-75 dBm	12.71 V
1734919064	0 Pkt	0 Pkt	-75 dBm	12.8 V
1734918140	0 Pkt	0 Pkt	-73 dBm	12.65 V
1734917216	0 Pkt	0 Pkt	-76 dBm	12.65 V
1734916292	0 Pkt	0 Pkt	-74 dBm	12.61 V
1734915368	0 Pkt	0 Pkt	-76 dBm	12.63 V
1734914444	0 Pkt	0 Pkt	-74 dBm	12.67 V
1734913520	0 Pkt	0 Pkt	-73 dBm	12.65 V
1734912595	0 Pkt	0 Pkt	-71 dBm	12.74 V
1734911671	0 Pkt	0 Pkt	-74 dBm	12.67 V
1734910747	0 Pkt	0 Pkt	-75 dBm	12.67 V
1734909823	0 Pkt	0 Pkt	-73 dBm	12.67 V
1734908899	0 Pkt	0 Pkt	-74 dBm	12.65 V
1734907975	2 Pkt	0 Pkt	-74 dBm	12.63 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)