RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9A2RI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A2RI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734904231	14.38 Volt	670 Pkt	230 Pkt	77 Pcnt
1734903330	14.38 Volt	660 Pkt	230 Pkt	76 Pcnt
1734902429	14.38 Volt	640 Pkt	230 Pkt	74 Pcnt
1734901528	14.3 Volt	640 Pkt	220 Pkt	74 Pcnt
1734900628	14.38 Volt	640 Pkt	210 Pkt	74 Pcnt
1734899727	14.38 Volt	670 Pkt	210 Pkt	76 Pcnt
1734898826	14.3 Volt	670 Pkt	190 Pkt	77 Pcnt
1734897925	14.38 Volt	700 Pkt	190 Pkt	78 Pcnt
1734897027	14.3 Volt	680 Pkt	180 Pkt	78 Pcnt
1734896123	14.22 Volt	650 Pkt	180 Pkt	77 Pcnt
1734895222	14.3 Volt	660 Pkt	210 Pkt	78 Pcnt
1734894321	14.3 Volt	630 Pkt	220 Pkt	80 Pcnt
1734893421	14.3 Volt	620 Pkt	220 Pkt	78 Pcnt
1734892520	14.3 Volt	630 Pkt	230 Pkt	80 Pcnt
1734891620	14.38 Volt	640 Pkt	220 Pkt	80 Pcnt
1734890718	14.3 Volt	640 Pkt	220 Pkt	79 Pcnt
1734889817	14.3 Volt	650 Pkt	220 Pkt	80 Pcnt
1734888917	14.3 Volt	680 Pkt	230 Pkt	80 Pcnt
1734888015	14.3 Volt	640 Pkt	200 Pkt	76 Pcnt
1734887115	14.38 Volt	650 Pkt	200 Pkt	76 Pcnt
1734886214	14.3 Volt	650 Pkt	220 Pkt	78 Pcnt
1734886105	14.3 Volt	730 Pkt	230 Pkt	84 Pcnt
1734885313	14.38 Volt	640 Pkt	220 Pkt	77 Pcnt
1734884414	14.3 Volt	680 Pkt	240 Pkt	82 Pcnt
1734883511	14.3 Volt	700 Pkt	240 Pkt	83 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)